Weatherization & Flashing
Blueskin by Henry
Blueskin RF-200
Henry® Blueskin® RF200 is an SBS modified bitumen roofing membrane underlayment reinforced with a superior skid-resistant polyolefin surface film.
or Give us a Call
Product Summary
Henry® Blueskin® RF200 is an SBS modified bitumen roofing membrane underlayment reinforced with a superior skid-resistant polyolefin surface film. The membrane is specifically designed to be self-adhered on sloped roof surfaces as secondary seal under shingles or tile.
Features
- Self-seals around nails and fasteners for lasting watertightness
- Fully adhered system prevents lateral moisture migration
- Premium skid-resistant textured blue film surface
- Split-back release liner for easier handling and faster application
- Shrink-wrap packaging for better product protection during storage in various weather conditions
Sizes available
195 sq. ft. (3 feet wide x 65 linear feet)
Construction and Materials
Blueskin by Henry offers a range of high-performance waterproofing membranes designed to protect buildings from the elements. These products are primarily constructed from asphalt-based materials, often modified for enhanced flexibility and adhesion. The core of these membranes typically consists of a polyester or fiberglass reinforcement fabric, which provides dimensional stability and strength. This reinforcement is saturated and coated with specially formulated asphalt blends. The top surface is usually protected with a release film or granules, depending on the specific product, to prevent sticking during storage and handling.
The construction of Blueskin membranes typically involves a self-adhering application process. This means the underside of the membrane is coated with a pressure-sensitive adhesive, allowing it to stick firmly to the prepared substrate without the need for torches or hot asphalt. This self-adhering nature contributes to ease of installation and helps to create a seamless, watertight barrier.
Key Materials and Construction Features:
- Core Reinforcement: A strong polyester or fiberglass scrim provides tensile strength and dimensional stability, preventing the membrane from stretching or shrinking excessively.
- Waterproofing Layer: Asphaltic bitumen, often modified with polymers (such as APP or SBS), forms the primary waterproofing component. This modification enhances flexibility, UV resistance, and temperature performance.
- Adhesive System: A proprietary pressure-sensitive adhesive on the underside ensures a strong bond to various building substrates when applied under proper conditions.
- Top Surface: Depending on the specific Blueskin product, the top surface may be finished with:
- A removable release liner (typically silicone-coated film) that is peeled away before application.
- Fine mineral granules for added UV protection and fire resistance in certain applications.
- Self-Adhering Technology: The core construction method relies on the self-adhering properties of the material for installation, promoting a reliable seal.
These materials and construction techniques are employed across the Blueskin by Henry product line to provide robust waterproofing solutions for various building envelope applications, including roofing underlayment, sheathing protection, and ice and water barrier functions.
Features and Benefits
Blueskin by Henry: Superior Weather Protection for Your Roof and Building Envelope
Blueskin by Henry offers a comprehensive range of high-performance self-adhered waterproofing membranes designed to provide exceptional protection against water intrusion and air leakage in roofing and building envelope applications. Engineered for durability and ease of installation, Blueskin membranes create a seamless, monolithic barrier that safeguards structures from the damaging effects of moisture and the elements.Key Features and Benefits:
- Self-Adhered Installation: Blueskin membranes feature a factory-applied adhesive that ensures a strong, tenacious bond to the substrate. This eliminates the need for torches, adhesives, or primers in many applications, simplifying the installation process and reducing labor costs. The self-adhered nature also minimizes the risk of installation errors, leading to a more reliable seal.
- Waterproof and Impermeable: The primary function of Blueskin is to prevent water penetration. Its impermeable nature effectively stops bulk water from entering the building structure, protecting against rot, mold, and structural damage.
- Air Barrier Capabilities: Beyond moisture control, Blueskin membranes also act as an effective air barrier. This helps to minimize uncontrolled air leakage through the building envelope, improving energy efficiency by reducing heating and cooling losses. A well-sealed building envelope also contributes to improved indoor air quality.
- Durability and Longevity: Blueskin products are formulated for long-term performance. They are designed to withstand the harsh conditions of construction and the ongoing stresses of weather, UV exposure, and temperature fluctuations, providing a durable and lasting protective layer for the life of the building.
-
Versatile Application: Blueskin membranes are suitable for a variety of applications, including:
- As underlayment for various roofing materials.
- In conjunction with roofing and sheathing for enhanced weather protection.
- As a critical component in weatherization and flashing systems.
- As an ice and water barrier in vulnerable areas of the roof.
- Enhanced Thermal Performance: By acting as an air barrier, Blueskin contributes to the overall thermal performance of the building envelope. Reducing air infiltration means less conditioned air escapes and less unconditioned air enters, leading to more stable indoor temperatures and reduced energy consumption.
- Ease of Handling and Cutting: The membranes are designed for ease of use on the jobsite. They are typically easy to handle, cut, and position, further streamlining the installation process.
Core Advantages of Blueskin by Henry:
- System Integration: Blueskin membranes are designed to work effectively as part of a complete building envelope system, offering a cohesive approach to weather protection.
- Reliable Performance: The self-adhered technology provides a consistent and robust seal, reducing the risk of leaks and air intrusion that can compromise building integrity and occupant comfort.
- Efficiency and Cost-Effectiveness: The simplified installation process, coupled with the inherent durability and energy-saving benefits, makes Blueskin a cost-effective solution for long-term building protection.
Options-Styles
Blueskin by Henry offers a range of high-performance weatherization and flashing solutions designed to protect buildings from the elements. Their products are primarily categorized within Roofing (Underlayment & Sheathing) and Weatherization & Flashing (Ice & Water Barrier) applications, providing critical defense against moisture intrusion and air leakage.
The style of Blueskin by Henry products generally emphasizes durability, ease of application, and long-term performance. These are often self-adhering membranes, designed to create a seamless, waterproof barrier when properly installed.
Product Options and Features
Blueskin by Henry offers several key product lines and variations, catering to different needs within the building envelope:
- Blueskin VP 100: This is a popular vapor-permeable air barrier. It is designed to prevent air infiltration while allowing water vapor to escape, which is crucial for managing moisture within wall assemblies. Its self-adhered nature ensures a strong bond and a continuous barrier.
- Blueskin SA: A self-adhered waterproofing membrane. This product provides excellent protection against water intrusion and is commonly used as an underlayment for roofing systems and as a water-resistive barrier in wall systems. It is known for its tenacious adhesion and durability.
- Blueskin RF: Specifically formulated for roofing applications, Blueskin RF serves as a high-performance ice and water barrier. It is designed to withstand the harsh conditions of roofing installations and provides superior protection against ice damming and wind-driven rain.
- Blueskin Butyl Tape: A versatile sealing tape designed for use in conjunction with Blueskin membranes. It is ideal for flashing details, sealing seams, and ensuring continuity of the air and vapor barrier. Its butyl formulation provides excellent adhesion and long-term sealing properties.
- Blueskin Metal Flashing: While not a membrane, Blueskin by Henry also offers metal flashing products that complement their membrane systems. These are engineered to integrate seamlessly with their weatherization products, providing robust protection at critical junctions like windows, doors, and penetrations.
The primary style across these options is a focus on creating a continuous, high-performance barrier. Installation typically involves peeling back a release liner and pressing the membrane firmly into place, creating an instant and effective seal. This self-adhering technology simplifies the installation process, reduces the need for specialized equipment, and contributes to a more efficient construction timeline.
- Homepage
- Products
- Specifications
- Warranty
- About Us
-
Green - Environmental
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Roofing and Weatherization & Flashing products.
Delta
Air & Moisture Barriers
Dorken's Delta® high performance air & moisture barriers mean better protection.
or Give us a Call
Product Summary
For residential solutions, the right air and moisture barrier is one of the most critical components of the building envelope. Traditional barriers are no longer good enough. Whether you need moisture management for your walls, roof or foundation, DELTA® has the high-performance product to meet your specific needs.
As commercial buildings become more energy efficient and strive for higher LEED qualifications, air and moisture control in the building envelope is becoming more important. DELTA® has the technical support and products to enable architects to specify the best solution for each building.
Construction and Materials
Dorken Delta Products offers a range of innovative solutions designed to enhance the performance and longevity of building envelopes. Their products fall under the categories of Weatherization & Flashing, including Air & Water Barriers, Rainscreens, and Rainscreen Systems.
The construction of these products typically involves multi-layer materials engineered for optimal breathability, water resistance, and air control. These are not simple films but rather sophisticated assemblies designed to manage moisture and air movement effectively within wall systems.
Key materials commonly found in Dorken Delta products include:
- High-Density Polyethylene (HDPE) or Polypropylene: These form the core of many membranes, providing a robust and durable foundation for air and water barrier functions.
- Non-woven Fabrics: Often made from polypropylene, these layers contribute to the product's tear resistance, impact strength, and can provide a textured surface for drainage and ventilation in rainscreen applications.
- Microporous Membranes: These advanced materials are designed to allow water vapor to escape from the building while preventing liquid water and air from penetrating the wall cavity.
- Adhesives and Coatings: Specialized coatings and adhesives are used to ensure airtightness and securement, particularly in integrated systems where membranes are designed to be sealed together.
- Perforations or Grooves: In rainscreen products, the construction often includes specifically engineered perforations or grooves on the surface to create an air gap and facilitate drainage behind the cladding.
The integration of these materials allows Dorken Delta products to function as:
- Air & Water Barriers: These products are critical for preventing uncontrolled air infiltration and exfiltration, which can lead to significant energy loss and moisture-related building damage. They also act as a secondary defense against bulk water penetration, protecting the building structure from the elements.
- Rainscreens: Dorken Delta's rainscreen products create a ventilated and drained cavity behind the exterior cladding. This gap allows any water that may penetrate the cladding to drain freely and any trapped moisture to dry out, significantly reducing the risk of rot, mold, and material degradation.
- Rainscreen Systems: These are comprehensive solutions that often include the rainscreen membrane, accessories for sealing and detailing, and sometimes even integrated components designed to simplify installation and enhance performance. The system approach ensures that all parts work together harmoniously to create a complete and effective weather protection solution.
The design of Dorken Delta products emphasizes ease of installation, durability in challenging construction environments, and long-term performance, contributing to healthier, more energy-efficient, and durable buildings.
Features and Benefits
The Delta brand, from Dorken Delta Products, offers a comprehensive range of weatherization and flashing solutions designed to protect buildings from air and water infiltration while enhancing energy efficiency. Their product line focuses on advanced Air & Water Barrier systems, Rainscreen technology, and integrated Rainscreen Systems.
Core Advantages
- Superior Air and Water Protection: Delta products create a robust barrier against external elements, preventing moisture and air from penetrating the building envelope.
- Enhanced Durability and Longevity: By effectively managing moisture, Delta solutions contribute to the long-term integrity and lifespan of building structures.
- Improved Energy Efficiency: Minimizing air leakage significantly reduces heating and cooling loads, leading to substantial energy savings and a more comfortable indoor environment.
- Advanced Rainscreen Technology: Delta's expertise in rainscreens promotes optimal drying of the facade, preventing interstitial condensation and the associated risks of mold and rot.
- Systematic Approach: Delta offers integrated systems, ensuring compatibility and optimal performance when components are used together.
Product Features and Benefits
Air & Water Barrier Systems
Delta provides high-performance membranes and tapes engineered to create a continuous, airtight, and watertight seal within the building envelope. These systems are crucial for preventing uncontrolled air movement and the ingress of bulk water, which can lead to significant structural damage and occupant discomfort.
- High Water Vapor Permeability: Allows moisture trapped within the wall assembly to escape, preventing condensation buildup and protecting insulation from becoming damp.
- Excellent Air Tightness: Significantly reduces air leakage, contributing to improved indoor air quality and substantial energy savings by minimizing heat loss or gain.
- Durability and Robustness: Designed to withstand the rigors of construction and long-term exposure to environmental conditions.
- Easy Installation: Many Delta membranes and tapes are designed for straightforward application, reducing labor time and costs on site.
- Compatibility: Works effectively with a wide range of building materials and insulation types.
Rainscreen Technology
Delta's rainscreen solutions are designed to create a ventilated drainage plane behind the exterior cladding. This gap allows for the unimpeded flow of water away from the building structure and promotes drying through ventilation, a critical aspect of modern building science.
- Effective Water Drainage: Channels bulk water away from the facade, preventing it from reaching the weather-resistive barrier and structural components.
- Enhanced Drying: The ventilated cavity promotes rapid drying of the facade, reducing the risk of moisture-related deterioration such as rot, mold, and corrosion.
- Pressure Moderation: Helps to equalize air pressure between the exterior and the cavity, reducing the driving force for water penetration during wind-driven rain events.
- Protection of Building Materials: Extends the life of cladding, sheathing, and insulation by keeping them dry and protected from moisture damage.
- Improved Thermal Performance: By keeping insulation dry, the overall thermal performance of the wall assembly is maintained and optimized.
Rainscreen Systems
Delta offers complete integrated rainscreen systems that combine their advanced membranes and drainage components. These systems are meticulously designed to work in harmony, providing a simplified and highly effective solution for creating a durable and breathable building facade.
- Engineered for Performance: Each component within the system is designed to complement the others, ensuring optimal performance of the entire rainscreen assembly.
- Comprehensive Protection: Provides a multi-layered defense against water ingress, air leakage, and moisture buildup.
- Simplified Specification and Installation: Offers a curated solution, reducing complexity in material selection and construction processes.
- Long-Term Building Health: Contributes to a healthy indoor environment and a durable, long-lasting building structure by effectively managing moisture.
- Aesthetic Flexibility: Facilitates the use of a wide variety of cladding materials while ensuring their performance and longevity.
Options-Styles
Delta offers a range of high-performance weatherization and flashing solutions designed to enhance building envelope integrity. Their product lines focus on air and water barrier systems, rainscreen technologies, and comprehensive rainscreen systems.
Air & Water Barrier Systems
Delta's air and water barrier systems are engineered to prevent uncontrolled air leakage and the ingress of liquid water, crucial for energy efficiency and moisture control. These membranes create a continuous barrier, protecting the building structure from the elements and improving indoor air quality.
Rainscreen Technology
The brand provides advanced rainscreen solutions that establish a ventilated airspace between the cladding and the weather-resistive barrier. This airspace allows for the drainage of bulk water and the escape of incidental moisture vapor, significantly reducing the risk of interstitial condensation and material degradation.
Rainscreen Systems
Delta's integrated rainscreen systems offer a complete approach to building envelope performance. These systems often include:
- Primary Weather-Resistive Barrier: Forms the initial line of defense against water and air infiltration.
- Drainage and Ventilation Components: Features designed to facilitate water drainage and air circulation within the rainscreen cavity.
- Accessories: A selection of tapes, sealants, and flashing elements that work in conjunction with the core system to ensure a continuous and robust barrier.
These systems are designed for durability and ease of installation, contributing to the long-term performance and aesthetic appeal of the building facade.
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Weatherization & Flashing products.
Weatherization
Weatherization
With easy-to-apply DuPont products, you’ll be equipped to seal out drafts and air leaks, block bulk water, and promote drying – keeping everybody inside comfortable in…
or Give us a Call
Product Summary
Living up to today’s demands for energy efficiency is about meeting or exceeding modern energy codes. DuPont building envelope solutions are designed to control air flow, eliminate leaks, and provide your building with the resilience to contend with the forces of nature.
Products such as DuPont™ FlexWrap™ EZ and LiquidArmor™ Flashing and Sealant improve the weather resistive barrier in your building, providing air and water holdout.
Construction and Materials
DuPont Performance Building Solutions offers a range of weatherization products designed to enhance the performance and durability of building envelopes. These products are engineered to provide effective air and water barrier solutions, flashing, specialized tapes, and rainscreen systems.
Construction and Materials
- Air & Water Barriers: These systems are typically constructed from advanced polymeric materials, often incorporating multi-layer technologies. The specific composition is designed to create a continuous barrier that prevents the ingress of liquid water and air while allowing water vapor to escape, promoting breathability and preventing moisture buildup within wall assemblies.
- Flashing: DuPont's flashing products are engineered for superior adhesion and conformability to various building substrates. They are often made from durable, self-adhered materials that form a robust seal around windows, doors, and other penetrations, effectively preventing water intrusion. The materials are chosen for their resistance to UV exposure, temperature fluctuations, and mechanical stress.
- Tape: The weatherization tapes are manufactured with specialized adhesives that provide long-lasting bonds to a variety of building materials, including sheathing, housewrap, and flashing. These tapes are designed to create airtight and watertight seals when used to join seams and cover fasteners, contributing to the overall integrity of the building envelope. The adhesive formulations are optimized for performance across a wide range of environmental conditions.
- Rainscreen Systems: DuPont's rainscreen solutions typically involve creating a ventilated air gap behind the exterior cladding. This construction method utilizes specialized materials to facilitate drainage and airflow. The system components work together to manage moisture by allowing water that penetrates the cladding to drain away and promoting drying through ventilation. The materials used in these systems are chosen for their durability and ability to withstand exterior environmental exposure.
Features and Benefits
DuPont Performance Building Solutions offers a comprehensive range of weatherization products designed to protect your building envelope from the elements, enhance energy efficiency, and improve interior comfort. These solutions are engineered for superior performance, durability, and ease of installation, making them a trusted choice for builders and homeowners alike.
The core advantage of DuPont's weatherization systems lies in their ability to create a continuous barrier against air and water intrusion. This integrated approach ensures that your building is effectively sealed, preventing drafts and moisture damage that can compromise structural integrity and lead to costly repairs. By minimizing air leakage, these products also contribute significantly to reducing energy consumption, leading to lower heating and cooling bills.
Product Categories and Key Benefits
-
Air & Water Barrier: These advanced membranes provide a critical line of defense against air and water infiltration.
- Feature: High-performance material that resists wind-driven rain and uncontrolled air movement.
- Benefit: Prevents moisture damage to insulation and building structure, reduces energy loss from drafts, and promotes a healthier indoor environment by controlling moisture and pollutants.
-
Flashing: DuPont offers a variety of flashing solutions designed to seal critical transition areas in the building envelope.
- Feature: Durable, flexible materials engineered for superior adhesion and long-term performance at window and door openings, penetrations, and wall intersections.
- Benefit: Creates a robust seal to prevent water ingress at vulnerable points, safeguarding against leaks and associated damage.
-
Tape: Specialized tapes are integral to creating a fully integrated weatherization system.
- Feature: High-tack adhesive tapes designed for seaming membranes, sealing laps, and detailing. Available in various formulations for different applications and environmental conditions.
- Benefit: Ensures the integrity of the air and water barrier by providing a reliable and long-lasting seal, reinforcing critical joints and seams for ultimate protection.
-
Rainscreen: Innovative rainscreen systems promote drainage and ventilation behind the exterior cladding.
- Feature: Creates a ventilated air gap that allows moisture to drain and dry effectively.
- Benefit: Extends the life of cladding materials by preventing moisture buildup, reduces the risk of mold and mildew growth, and improves the overall durability and comfort of the building.
Core Advantages of DuPont Weatherization Products
- Enhanced Building Performance: By creating a superior air and water barrier, these products significantly improve a building's resilience and energy efficiency.
- Durability and Longevity: Engineered with high-quality materials, DuPont weatherization solutions are built to withstand harsh environmental conditions and provide long-term protection.
- Integrated System Approach: The comprehensive product line allows for the creation of a fully integrated weatherization system, ensuring seamless protection across the entire building envelope.
- Ease of Installation: Designed with the professional installer in mind, these products are often easy to cut, handle, and apply, saving time and labor costs on the job site.
- Moisture Management: Effectively controls the movement of water vapor and liquid water, preventing damaging moisture accumulation within wall assemblies.
- Energy Savings: Minimizing air leakage directly contributes to reduced heating and cooling costs, leading to significant energy savings over the lifespan of the building.
Options-Styles
DuPont Performance Building Solutions offers a comprehensive range of weatherization and flashing products designed to enhance building envelope performance, providing superior air and water barrier protection. Their product line encompasses solutions for various applications, including air and water barriers, flashing materials, specialized tapes, and rainscreen systems.
Air & Water Barrier Systems
These systems are engineered to prevent unwanted air and water infiltration, contributing to energy efficiency and long-term durability of the building structure. DuPont offers a selection of advanced materials that create a continuous barrier, addressing critical points of potential leakage. These barriers are crucial for maintaining indoor air quality and protecting against moisture-related damage.
Flashing
DuPont provides high-performance flashing solutions designed to seal and protect vulnerable areas of the building envelope, such as around windows, doors, and roof penetrations. These products are critical in preventing water intrusion and ensuring the integrity of the weatherization system. The flashing materials are developed for durability and ease of application, offering reliable protection against the elements.
Tapes
A variety of specialized tapes are available to complement the air and water barrier systems. These tapes are formulated for strong adhesion and long-term performance, ensuring that seams and overlaps are securely sealed. They play a vital role in creating a continuous and effective barrier against air and moisture. Options likely include tapes designed for specific applications and substrate compatibility.
Rainscreen Systems
DuPont offers solutions for rainscreen installations, which involve creating an air gap behind the cladding. This gap allows for drainage and ventilation, helping to manage moisture and improve the drying potential of the wall assembly. Rainscreen systems are a key component in advanced building science for enhancing the longevity and performance of the exterior wall.
- Homepage
- Products
- Specifications
- Instructions
- Warranty
- About Us
- Video
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Weatherization & Flashing products.
HydroGap
HydroGap Drainable Housewrap
HydroGap Drainable Housewrap's unique design provides up to two times the performance over other drainable housewraps and removes over 100 times more bulk water than…
or Give us a Call
Product Summary
HydroGap Drainable Housewrap eliminates excess moisture in a matter of minutes and prevents the damaging effects of mold and rot. Its unique design provides up to two times the performance over other drainable housewraps and removes over 100 times more bulk water than standard housewraps.
Construction and Materials
The HydroGap product from HydroGap is designed as a high-performance weatherization and flashing solution, specifically for air and vapor barrier applications. Its innovative design addresses common building envelope challenges, promoting long-term durability and energy efficiency.
The core of the HydroGap system relies on a unique, multi-layer construction. This construction creates a robust and effective barrier against water intrusion and uncontrolled air movement.
Construction and Materials:- Drainage and Ventilation Core: The primary component features a proprietary, three-dimensional mesh or spacer material. This core is engineered to create a continuous air gap, typically measuring 5-6mm, between the cladding and the substrate. This gap is crucial for facilitating drainage of bulk water and allowing for ventilation of the wall cavity. The material used for this core is durable and resistant to degradation from environmental factors such as UV exposure and moisture.
- Permeable Facings: The core is often encapsulated by high-quality, permeable fabric facings on one or both sides. These facings are typically made from non-woven synthetic materials. They are carefully selected to allow for the passage of water vapor outwards from the building envelope, preventing moisture buildup within the wall assembly. Simultaneously, these facings act as a filter, preventing dust, insects, and other debris from entering the ventilation gap.
- Adhesive System (if applicable): In certain HydroGap configurations, an integrated adhesive strip may be present. This adhesive is designed for strong, permanent bonding to common building materials such as sheathing, housewrap, and window frames. The adhesive is formulated to maintain its integrity under varying temperature and humidity conditions, ensuring a secure seal.
- UV Resistance: The materials used throughout the HydroGap construction are selected for their inherent UV resistance, ensuring that the product can withstand prolonged exposure to sunlight during the construction process before cladding is installed.
- Moisture Management: The open structure of the drainage core, coupled with the vapor-permeable facings, creates a resilient system for managing moisture. This design helps to prevent rot, mold, and mildew by allowing water to drain freely and moisture vapor to escape.
The unique combination of these materials and the engineered drainage gap allows HydroGap to serve as an effective rainscreen system, protecting the building envelope from the damaging effects of water while promoting a healthy and durable structure.
Features and Benefits
HydroGap is a revolutionary weatherization and flashing system designed to create a continuous air and vapor barrier, ensuring superior building envelope performance. This innovative product addresses critical issues in construction by providing a reliable solution for moisture management and energy efficiency. Its core advantage lies in its ability to prevent uncontrolled air leakage and moisture intrusion, which are significant contributors to building degradation, energy loss, and compromised indoor air quality.
The HydroGap system is engineered with advanced materials and a unique design that promotes both protection and breathability. This dual functionality is crucial for long-term building durability and occupant comfort. By creating a robust barrier against the elements, HydroGap safeguards the building structure from water damage, mold growth, and rot, extending the lifespan of the construction. Simultaneously, its vapor-permeable properties allow trapped moisture within wall assemblies to escape, preventing condensation and its detrimental effects.
Key Features and Benefits
- Continuous Air and Vapor Barrier: HydroGap forms an unbroken seal across the entire building envelope, effectively stopping air infiltration and exfiltration. This leads to significant energy savings by reducing the load on heating and cooling systems. The containment of air movement also prevents drafts, enhancing occupant comfort.
- Advanced Moisture Management: The system actively manages moisture by preventing liquid water from entering the wall assembly while allowing water vapor to escape. This breathability is vital for preventing the buildup of interstitial condensation, which can lead to structural damage and mold.
- Durability and Longevity: HydroGap is constructed from high-quality materials that are resistant to UV radiation, tearing, and punctures. This ensures its integrity and performance throughout the lifespan of the building, reducing the need for costly repairs and replacements.
- Ease of Installation: Designed with the professional installer in mind, HydroGap offers a straightforward and efficient application process. Its flexibility and adaptability to various building substrates contribute to faster project completion times and reduced labor costs.
- Improved Indoor Air Quality: By controlling air leakage, HydroGap helps to prevent the ingress of outdoor pollutants, dust, and allergens. This contributes to a healthier indoor environment for occupants.
- Enhanced Energy Efficiency: A well-sealed building envelope significantly reduces energy consumption. HydroGap's ability to minimize air leakage directly translates into lower utility bills and a more sustainable building.
- Structural Protection: The prevention of moisture intrusion protects the building's structural components from water damage, rot, and decay. This proactive approach preserves the integrity and value of the property.
Core Advantages of HydroGap
The primary advantage of the HydroGap system is its comprehensive approach to building envelope performance. It doesn't just act as a barrier; it actively manages the complexities of moisture and air movement within a structure. This results in:
- Superior Energy Performance: The elimination of air leaks drastically improves thermal efficiency, leading to substantial energy savings and a reduced carbon footprint.
- Long-Term Building Health: By preventing moisture-related damage, HydroGap ensures the structural integrity and longevity of the building, minimizing future repair costs and preserving asset value.
- Enhanced Occupant Comfort and Health: Consistent temperatures, the absence of drafts, and improved indoor air quality create a more comfortable and healthier living or working environment.
HydroGap provides a robust and reliable solution for modern construction challenges, offering peace of mind through its advanced weatherization and flashing capabilities.
Options-Styles
HydroGap offers a comprehensive range of air and vapor barrier solutions designed to enhance the performance and durability of building envelopes. These products are engineered to prevent uncontrolled air leakage and manage moisture, contributing to improved indoor air quality, energy efficiency, and occupant comfort.
The product line focuses on providing robust protection against the elements while allowing for the necessary diffusion of moisture vapor. This dual functionality is crucial for maintaining the structural integrity of walls and roofs over time. HydroGap products are suitable for a variety of building applications, including new construction and renovations.
Product Options and Styles
-
Weather Resistive Barriers (WRBs): These membranes act as the primary defense against bulk water intrusion while allowing water vapor to escape from within the wall assembly. They are designed to be installed directly over sheathing, providing a continuous layer of protection.
- Available in various types to suit different climate zones and wall assembly requirements.
- Designed for high breathability and water holdout.
-
Vapor Retarders: These products control the rate at which water vapor can move through a wall or roof assembly. They are typically used on the warm-in-place side of the insulation in colder climates to prevent condensation within the building structure.
- Offered in different permeance ratings to meet specific building codes and design specifications.
- Formulated to provide effective vapor control without trapping moisture.
-
Air Barrier Membranes: Engineered to stop air movement through the building envelope, these membranes are critical for achieving energy efficiency targets and preventing the transport of moisture and pollutants via air leakage.
- Designed for superior air impermeability.
- Seamless application is often a key feature, ensuring continuous air barrier performance.
-
Accessories and Tapes: A range of complementary products are available to ensure the integrity and effectiveness of the air and vapor barrier system.
- Specialized tapes for sealing seams, penetrations, and transitions between different materials.
- Adhesives and sealants designed to work in conjunction with the barrier membranes for a complete, monolithic system.
- Flashing products to integrate the barrier system with window, door, and other openings.
Product Features and Benefits
- Durability: HydroGap products are manufactured with high-quality materials to withstand construction site conditions and provide long-term performance.
- Ease of Installation: Many products are designed for straightforward installation, reducing labor time and costs on the job site.
- Building Code Compliance: The product line is developed to meet or exceed relevant building codes and industry standards for weatherization and building envelope performance.
- Energy Efficiency: By effectively managing air and vapor transfer, these solutions contribute to reducing heating and cooling loads, leading to significant energy savings.
- Moisture Management: Proper installation of HydroGap systems helps prevent condensation issues within walls and roofs, thereby protecting building materials from rot, mold, and degradation.
- Improved Indoor Air Quality: Reducing air leakage minimizes the ingress of dust, pollen, and other outdoor pollutants, leading to a healthier indoor environment.
- Features & Benefits
- Homepage
- Products
- Specifications
- Instructions
- Warranty
- General Information
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Weatherization & Flashing products.
James Hardie - HardieWrap® Weather Barriers
HardieWrap® Weather Barriers
Moisture management starts with the wrap. HardieWrap® weather barriers deliver the performance you've come to expect from James Hardie.
or Give us a Call
Product Summary
HardieWrap weather barrier provides a balance of water resistance and breathability, reducing water intrusion while allowing water vapor from inside your home to escape. This keeps the area within your walls dry.
HardieWrap Pro-Flashing is a butyl rubber self-adhesive designed to peel and stick around windows and doors to prevent water and air intrusion. It also self-seals around fasteners.
HardieWrap Flex Flashing is designed to easily stretch and seal around custom shapes — including windows and doorsills — to prevent water and air from entering the building.
HardieWrap Seam Tape is designed to seal vertical and horizontal seams and small holes in the weather barrier to prevent air and water infiltration.
Construction and Materials
James Hardie's HardieWrap® Weather Barriers are engineered to provide a robust defense against the elements for residential and commercial building envelopes. Designed as a critical component of the James Hardie building system, these weather barriers are intended to work seamlessly with their fiber cement siding products, offering comprehensive protection.
Construction and Materials
The HardieWrap® Weather Barriers are constructed with a focus on durability and performance. While specific material compositions can vary slightly between different product lines within the HardieWrap® family, the core design emphasizes a balance of water resistance and vapor permeability.
- Material Composition: Typically, these barriers are multi-layered products that often include a non-woven fabric or a reinforced cellulosic material. These layers are engineered to create a continuous barrier against liquid water intrusion, preventing it from reaching the sheathing and framing.
- Permeability: A key characteristic of HardieWrap® products is their breathability. They are designed to be vapor-permeable, allowing moisture vapor that may become trapped within the wall cavity to escape. This property is crucial for preventing the buildup of moisture, which can lead to mold, mildew, and structural damage over time.
- Durability and Strength: The materials used are selected for their resistance to tearing and puncturing, which can occur during installation or from impact. This ensures the integrity of the barrier is maintained throughout its service life.
- UV Resistance: Some HardieWrap® products are formulated to offer resistance to ultraviolet (UV) radiation. This is important as the weather barrier may be exposed to sunlight for a period before the exterior cladding is installed, and UV exposure can degrade certain materials.
Product Range and Features
James Hardie offers a range of weather barrier solutions, each designed to meet specific building code requirements and performance expectations.
- HardieWrap® Flex: This product is known for its flexibility, allowing it to conform easily to contours and corners of the building envelope. This adaptability helps in creating a more seamless and effective barrier, particularly in areas with complex geometries.
- HardieWrap® Commercial: Designed for the demands of larger construction projects, this option often provides enhanced durability and robust protection suitable for commercial applications.
- Integrated Systems: HardieWrap® weather barriers are intended to be part of a larger building system. They are designed to work in conjunction with other components, such as flashing tapes and sealants, to create a complete air and water-resistive barrier.
The installation of HardieWrap® Weather Barriers typically involves mechanical fastening, such as stapling or nailing, directly to the building's structural sheathing. Proper lapping and sealing of seams are essential for ensuring the continuity and effectiveness of the barrier.
Features and Benefits
James Hardie HardieWrap® Weather Barriers are advanced solutions designed to protect your home's structure from the elements, enhancing its longevity and energy efficiency.
Features and Benefits
-
Superior Water Resistance
HardieWrap® Weather Barriers are engineered to effectively repel bulk water, preventing it from reaching the building's sheathing and framing. This is crucial for maintaining the integrity of your home's structure, avoiding costly water damage, rot, and mold growth.
-
Exceptional Air Barrier Performance
These weather barriers provide a robust air barrier, significantly reducing uncontrolled air infiltration. By minimizing air leaks, HardieWrap® helps to maintain a consistent indoor temperature, leading to improved occupant comfort and substantial savings on heating and cooling costs.
-
Vapor Permeability
While effectively stopping bulk water and air intrusion, HardieWrap® Weather Barriers are designed to be permeable to water vapor. This allows moisture that may become trapped within the wall cavity to escape, preventing the buildup of condensation and further protecting against structural damage and mold.
-
Durability and Strength
Manufactured with high-quality materials, HardieWrap® offers excellent tear resistance and durability, ensuring it can withstand the rigors of construction and provide long-term protection. This strength is essential for maintaining its performance throughout the life of the building.
-
Ease of Installation
HardieWrap® Weather Barriers are designed for straightforward and efficient installation, which can help to reduce labor time and costs on the job site. Their practical design contributes to a smoother construction process.
-
Compatibility with James Hardie Siding Products
HardieWrap® is specifically designed to work in conjunction with James Hardie® siding and trim products, creating a comprehensive and integrated building envelope system. This ensures optimal performance and a cohesive finish.
Core Advantages
-
Enhanced Building Envelope Performance
The primary advantage of HardieWrap® Weather Barriers lies in their ability to create a high-performance building envelope. By effectively managing water, air, and vapor, they contribute to a healthier, more durable, and energy-efficient home.
-
Long-Term Structural Protection
The robust protection offered by HardieWrap® against water intrusion and air leaks directly translates to enhanced long-term structural integrity. This safeguards the investment in your home by preventing the common issues that can arise from inadequate weatherproofing.
-
Improved Energy Efficiency and Comfort
By minimizing air leakage, HardieWrap® plays a significant role in improving a home's energy efficiency. This leads to a more comfortable living environment with reduced drafts and more stable indoor temperatures, resulting in lower energy bills.
-
Peace of Mind
Choosing James Hardie HardieWrap® Weather Barriers provides homeowners and builders with the confidence that their structure is protected by a reliable and high-quality weatherization system, backed by the reputation of a leading building materials manufacturer.
Options-Styles
James Hardie's HardieWrap® Weather Barriers are engineered to provide robust protection against air and water infiltration, contributing to the long-term durability and performance of your building envelope. These weather barriers are designed to work in conjunction with James Hardie's premium siding products, ensuring a comprehensive system for your home's exterior.
Product Options and Styles
The HardieWrap® Weather Barrier system offers a focused approach to protecting your home's structure. The primary product within this line is:
- HardieWrap® Commercial Weather Barrier: This is a high-performance, non-woven weather-resistive barrier (WRB) that is specifically designed for commercial construction applications. It provides a critical layer of defense against bulk water and air intrusion.
While the primary focus is on the commercial application, the principles of air and water resistance are fundamental to all weather barrier systems. These products are typically installed directly over the sheathing and beneath the exterior cladding, acting as a crucial line of defense:
- Air Barrier Functionality: HardieWrap® helps to prevent unwanted air movement into and out of the building. This is essential for improving energy efficiency, maintaining indoor comfort, and preventing moisture accumulation within wall cavities.
- Water Resistive Barrier (WRB) Functionality: The weather barrier is designed to stop bulk water, such as rain and snowmelt, from penetrating the wall system. This protects the underlying building structure from water damage, rot, and mold growth.
Installation and Integration
James Hardie's approach emphasizes a complete system for building envelope performance. The HardieWrap® Weather Barriers are designed to integrate seamlessly with their siding products, along with compatible flashing and tape solutions. Proper installation, including the use of appropriate tapes and sealants, is critical to achieving the full benefits of the weather barrier system.
The system works to:
- Protect Against Water Intrusion: By creating a barrier against rain and other forms of moisture, it safeguards the building's structure from damage.
- Control Air Leakage: Reducing air infiltration leads to better thermal performance and improved indoor air quality.
- Contribute to Durability: A well-protected wall assembly is more resistant to the elements, leading to a longer lifespan for the building.
While specific product variations in terms of material composition or unique features are not detailed beyond the primary offering, the HardieWrap® line is built upon the foundation of effective weather protection, a hallmark of James Hardie's commitment to building science and product innovation.
- Homepage
- Products
- Specifications
- Instructions
- Warranty
- About Us
- Video
- Photo Gallery
-
Green - Environmental
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Weatherization & Flashing products.
Protecto Wrap
Weather Barriers, Envelope Solutions, Sealers & Liners
Whatever your waterproofing, roofing underlayment or flashing needs, Protecto Wrap has you covered.
or Give us a Call
Product Summary
Construction and Materials
Protecto Wrap offers a range of weatherization and flashing products designed to create effective air and water barriers for building envelopes. These products are engineered to protect structures from moisture intrusion, air leakage, and the damaging effects of ice dams.
Construction and Materials
The construction and materials used in Protecto Wrap products are central to their performance as air and water barriers. While specific formulations may vary across their product lines, the core principles of their design involve creating a robust and impermeable layer that can withstand various environmental conditions.
- Backing Material: Many Protecto Wrap products utilize a durable, flexible backing material. This material is typically a high-strength film or fabric designed to resist tearing and punctures during installation and throughout the lifespan of the building. The flexibility of the backing ensures conformity to building contours, even in challenging areas like corners and seams.
- Adhesive System: A key component of Protecto Wrap's effectiveness is its specialized adhesive system. These adhesives are formulated for strong, long-lasting adhesion to a variety of building substrates, including sheathing, framing, and other weather-resistive barriers. The adhesive is engineered to create an airtight and watertight seal, preventing the passage of both air and moisture. It often provides instant adhesion, allowing for immediate protection after application.
- Membrane Layer: Integrated within or applied to the backing is a water-impermeable membrane. This membrane is the primary barrier against liquid water. It is designed to be highly resistant to water penetration while often remaining vapor-permeable in certain product types, allowing trapped moisture within the wall assembly to escape.
- Reinforcement: Some products may incorporate reinforcement layers to enhance their physical strength and dimensional stability, particularly in areas subjected to higher stress.
- Release Liner: For ease of installation and to protect the adhesive, a release liner is typically applied to the adhesive side of the product. This liner is peeled away just before application, exposing the sticky surface for seamless integration into the building envelope.
Product Applications
Protecto Wrap's product line is categorized under Weatherization & Flashing, encompassing several key areas:
- Air & Water Barrier: These products are fundamental to creating a continuous barrier that prevents uncontrolled air and water infiltration, contributing to energy efficiency and building durability.
- Flashing: Specialized flashing tapes and membranes are designed to seal critical transitions and penetrations in the building envelope, such as around windows, doors, and vents, preventing water from entering these vulnerable areas.
- Tape: Various types of tapes are offered for sealing seams, laps, and penetrations, ensuring a complete and integrated weatherproofing system.
- Ice & Water Barrier: These products are specifically engineered to provide an extra layer of protection against ice damming and water intrusion in roof assemblies, particularly in eaves and valleys.
- Air & Vapor Barrier: Depending on the specific product, Protecto Wrap also offers solutions that control both air leakage and the movement of water vapor, which is crucial for managing moisture within building assemblies and preventing condensation issues.
Features and Benefits
Protecto Wrap offers a comprehensive range of weatherization and flashing solutions designed to safeguard buildings from the elements and enhance energy efficiency. Their product line encompasses critical components for creating robust air and water barriers, ensuring durable flashing for windows and doors, and providing reliable ice and water protection for roofing systems. Additionally, Protecto Wrap delivers effective air and vapor barrier materials to manage moisture within wall assemblies.
Core Advantages
- Comprehensive Protection: Protecto Wrap's integrated systems provide multi-layered defense against air infiltration, water intrusion, and vapor transmission, contributing to building longevity and occupant comfort.
- Durability and Performance: Products are engineered for superior adhesion and resilience, offering long-term performance in challenging environmental conditions.
- Ease of Application: Many Protecto Wrap products are designed for straightforward installation, reducing labor time and costs on job sites.
- Energy Efficiency: By creating effective air barriers and reducing thermal bridging, Protecto Wrap solutions help minimize energy loss, leading to lower heating and cooling expenses.
Product Categories and Features
Weatherization & Flashing
This category represents Protecto Wrap's commitment to creating building envelopes that perform under pressure.
Air & Water Barrier
- Function: These systems are engineered to prevent the uncontrolled movement of air and water into the building structure, which are primary causes of energy loss and moisture damage.
- Benefits:
- Reduces drafts and improves indoor air quality.
- Prevents water intrusion, which can lead to mold, rot, and structural compromise.
- Contributes significantly to a building's overall energy efficiency.
Flashing
- Function: Designed to protect vulnerable building transitions, such as around windows, doors, and penetrations, from water intrusion.
- Benefits:
- Creates a watertight seal at critical junctions.
- Prevents water damage to framing and sheathing.
- Enhances the lifespan and performance of fenestration and other penetrations.
Tape
- Function: High-performance tapes designed for sealing seams, joints, and penetrations within weatherization systems.
- Benefits:
- Provides a continuous air and water barrier when used in conjunction with other system components.
- Offers strong adhesion and durability in various weather conditions.
- Simplifies the sealing process for complex details.
Ice & Water Barrier
- Function: A critical underlayment for roofing systems that provides a secondary line of defense against ice dams and wind-driven rain, particularly in eaves, valleys, and around penetrations.
- Benefits:
- Protects the roof deck from moisture damage, especially in colder climates prone to ice buildup.
- Prevents leaks caused by melting ice and heavy rainfall.
- Extends the life of the roofing system by protecting its underlying structure.
Air & Vapor Barrier
- Function: These products control the movement of air and moisture vapor through the building envelope, helping to manage indoor humidity levels and prevent condensation within wall cavities.
- Benefits:
- Prevents the buildup of moisture that can lead to mold and material degradation.
- Improves thermal performance by maintaining the integrity of insulation.
- Enhances indoor comfort by regulating humidity.
Options-Styles
Protecto Wrap offers a comprehensive line of weatherization and flashing products designed to enhance building envelope performance. Their offerings fall into several key categories, including Air & Water Barriers, Flashing, Tapes, Ice & Water Barriers, and Air & Vapor Barriers.
Within the Air & Water Barrier category, Protecto Wrap provides solutions engineered to prevent the passage of both air and liquid water, crucial for energy efficiency and moisture control. These systems are integral to creating a robust building envelope.
The Flashing product line addresses critical detailing areas in construction. Proper flashing is essential for directing water away from vulnerable joints, transitions, and penetrations, preventing leaks and material degradation. Protecto Wrap's flashing solutions are designed for ease of application and long-term durability.
Tape products from Protecto Wrap are specialized for sealing seams, overlaps, and penetrations within weatherization systems. These tapes are formulated to provide strong adhesion and create an airtight and watertight seal, complementing the performance of their larger barrier products.
For roof and deck protection, Protecto Wrap offers Ice & Water Barrier products. These are specifically designed to prevent water intrusion from ice dams and wind-driven rain, particularly in vulnerable areas like eaves, valleys, and around roof penetrations. This category is vital for protecting the underlying roof structure and interior spaces from water damage.
The Air & Vapor Barrier offerings from Protecto Wrap are engineered to control the movement of air and water vapor through the building envelope. Proper management of air and vapor is critical for preventing condensation within wall and roof assemblies, which can lead to mold growth, rot, and reduced insulation effectiveness.
While specific product names and detailed specifications are not provided here, Protecto Wrap's product portfolio indicates a focus on providing integrated solutions for:
- Air Sealing: Preventing uncontrolled air leakage for improved comfort and energy savings.
- Water Management: Deflecting and shedding bulk water away from the building structure.
- Vapor Control: Managing the diffusion of water vapor to prevent condensation issues.
- Durability: Products designed for long-term performance in challenging environmental conditions.
- Ease of Installation: Solutions intended to streamline the construction process.
- Homepage
- Products
- Accessories
- Specifications
- About Us
- Video
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Weatherization & Flashing products.